PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-52924-57
2-52924-57 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR AND ALUMINUM ALLOY 6061 OVERALL, overall_width: 3.000 INCHES NOMINAL IN, aperture_width: 1.824 INCHES NOMINAL IN, overall_length: 3.000 INCHES NOMINAL IN, aperture_length: 2.380 INCHES NOMINAL IN, gage_ring_thickness: 0.090 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-795-4089, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-52924-57
NSN: 5330-00-795-4089
FSC: 5330
CAGE: 0JRC1 — NORTHROP GRUMMAN TECHNICAL SERVICES, INC. DBA DEFENSE SYSTEMS SECTOR (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR AND ALUMINUM ALLOY 6061 OVERALL
overall_width3.000 INCHES NOMINAL IN
aperture_width1.824 INCHES NOMINAL IN
overall_length3.000 INCHES NOMINAL IN
aperture_length2.380 INCHES NOMINAL IN
gage_ring_thickness0.090 INCHES NOMINAL IN
largest_bolt_hole_diameter0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL AND SYNTHETIC RUBBER
smallest_bolt_hole_diameter0.080 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
material_document_and_classificationMIL-S-6855 CLASS 1 GRADE 60 MIL SPEC 1ST MATERIAL RESPONSE AND QQ-A-327 ALLOY 6061-T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
center_to_center_distance_between_bolt_holes_along_width2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
center_to_center_distance_between_bolt_holes_along_length2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NSN5330-00-795-4089
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-52924-57 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LARGEST BOLT HOLE DIAMETER: 0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
•
APERTURE WIDTH: 1.824 INCHES NOMINAL IN
•
SMALLEST BOLT HOLE DIAMETER: 0.080 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855 CLASS 1 GRADE 60 MIL SPEC 1ST MATERIAL RESPONSE AND QQ-A-327 ALLOY 6061-T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR AND ALUMINUM ALLOY 6061 OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH: 2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
GAGE RING THICKNESS: 0.090 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LARGEST BOLT HOLE DIAMETER0.280 INCHES MINIMUM AND 0.285 INCHES MAXIMUM IN
APERTURE WIDTH1.824 INCHES NOMINAL IN
SMALLEST BOLT HOLE DIAMETER0.080 INCHES MINIMUM AND 0.083 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855 CLASS 1 GRADE 60 MIL SPEC 1ST MATERIAL RESPONSE AND QQ-A-327 ALLOY 6061-T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR AND ALUMINUM ALLOY 6061 OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH2.370 INCHES MINIMUM AND 2.380 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
GAGE RING THICKNESS0.090 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEMETAL AND SYNTHETIC RUBBER
APERTURE LENGTH2.380 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
3235427Interchangeable
interchangeable cross-reference
interchangeable
3215379Interchangeable
interchangeable cross-reference
interchangeable
4064Interchangeable
interchangeable cross-reference
interchangeable
22385Interchangeable
interchangeable cross-reference
interchangeable
BAC1503-1511Interchangeable
interchangeable cross-reference
interchangeable
10-33B40 STBY/TRAPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-52924-57?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-52924-57?
2-52924-57 is a GASKET.
What parts can replace 2-52924-57?
There are 15 known substitutes for 2-52924-57: 3235427, 3215379, 4064 and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-52924-57?
2-52924-57 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-795-4089. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-52924-57

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026