2-456N525-60: O-RING.
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, outside_diameter: 13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN, center_hole_diameter: 13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN, elongation_percentage: 510 MAXIMUM. This part is cataloged in the U.S.
Government catalog under NSN 5331-01-102-9880, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
| material | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| temp_rating | -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF |
| hardness_rating | 60.0 SHORE DUROMETER A NOMINAL |
| outside_diameter | 13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN |
| special_features | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MECURY CONTAMINATION |
| center_hole_diameter | 13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN |
| elongation_percentage | 510 MAXIMUM |
| cross-sectional_height | 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| criticality_code_justification | FEAT |
| NSN | 5331-01-102-9880 |
| TEMP RATING | -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF |
| CROSS-SECTIONAL HEIGHT | 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN |
| OUTSIDE DIAMETER | 13.943 INCHES MINIMUM AND 14.107 INCHES MAXIMUM IN |
| HARDNESS RATING | 60.0 SHORE DUROMETER A NOMINAL |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| ELONGATION PERCENTAGE | 510 MAXIMUM |
| SPECIAL FEATURES | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS AND CERTIFIED FREE FROM MECURY CONTAMINATION |
| CENTER HOLE DIAMETER | 13.445 INCHES MINIMUM AND 13.505 INCHES MAXIMUM IN |
| TEST DATA DOCUMENT | 81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |