PartsTable
Technical Data Sheet
Download PDF

2-40736-1 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-40736-1: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, end_radius: 0.261 INCHES NOMINAL IN, fork_depth: 0.640 INCHES NOMINAL IN, shank_length: 1.010 INCHES NOMINAL IN, thread_class: 3A ROD CONNECTION A, overall_width: 0.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-810-1599, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-40736-1
NSN: 5340-00-810-1599
FSC: 5340 — Hardware, Commercial
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
end_radius0.261 INCHES NOMINAL IN
fork_depth0.640 INCHES NOMINAL IN
shank_length1.010 INCHES NOMINAL IN
thread_class3A ROD CONNECTION A
overall_width0.375 INCHES NOMINAL IN
thread_length0.800 INCHES NOMINAL ROD CONNECTION IN
overall_height0.375 INCHES NOMINAL IN
shank_diameter0.310 INCHES NOMINAL IN
fork_span_width0.195 INCHES NOMINAL IN
special_featuresOBLONG FORK ARMHOLES 0.193 IN. WIDE BY 0.243 IN.LONG PARALLEL TO LONGITUDIAL AXIAL CENTER LINE IN
style_designatorCLEVIS
NSN5340-00-810-1599
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-40736-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.310 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.195 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.070 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.085 INCHES NOMINAL IN
•
END RADIUS: 0.261 INCHES NOMINAL IN
•
THREAD LENGTH: 0.800 INCHES NOMINAL ROD CONNECTION IN
•
SHANK LENGTH: 1.010 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.310 INCHES NOMINAL IN
OVERALL HEIGHT0.375 INCHES NOMINAL IN
FORK SPAN WIDTH0.195 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.070 INCHES NOMINAL IN
FORK ARM THICKNESS0.085 INCHES NOMINAL IN
END RADIUS0.261 INCHES NOMINAL IN
THREAD LENGTH0.800 INCHES NOMINAL ROD CONNECTION IN
SHANK LENGTH1.010 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-40736-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-40736-1?
2-40736-1 is a CLEVIS,ROD END.
What is the NSN for 2-40736-1?
2-40736-1 is cataloged in the U.S. Government catalog under NSN 5340-00-810-1599. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-40736-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.