PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-392N674-70
2-392N674-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF, hardness_rating: 72.0 SHORE DUROMETER A MINIMUM AND 78.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN, center_hole_diameter: 14.405 INCHES MINIMUM AND 14.545 INCHES MAXIMUM IN, cross-sectional_height: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-162-4704, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-392N674-70
NSN: 5331-01-162-4704
FSC: 5331 — O-RING
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
hardness_rating72.0 SHORE DUROMETER A MINIMUM AND 78.0 SHORE DUROMETER A MAXIMUM
outside_diameter23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN
center_hole_diameter14.405 INCHES MINIMUM AND 14.545 INCHES MAXIMUM IN
cross-sectional_height0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
NSN5331-01-162-4704
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-392N674-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 14.405 INCHES MINIMUM AND 14.545 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN
•
HARDNESS RATING: 72.0 SHORE DUROMETER A MINIMUM AND 78.0 SHORE DUROMETER A MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
•
TEMP RATING: -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER14.405 INCHES MINIMUM AND 14.545 INCHES MAXIMUM IN
OUTSIDE DIAMETER23.245 INCHES MINIMUM AND 23.475 INCHES MAXIMUM IN
HARDNESS RATING72.0 SHORE DUROMETER A MINIMUM AND 78.0 SHORE DUROMETER A MAXIMUM
CROSS-SECTIONAL HEIGHT0.269 INCHES MINIMUM AND 0.281 INCHES MAXIMUM IN
TEMP RATING-65.0 FAHRENHEIT AND 275.0 FAHRENHEIT DEGF
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
PRP568-458-4067-70Interchangeable
interchangeable cross-reference
interchangeable
2-458 N304-75Interchangeable
interchangeable cross-reference
interchangeable
MS28775-458Interchangeable
interchangeable cross-reference
interchangeable
2-458N674-70Interchangeable
interchangeable cross-reference
interchangeable
112152002 PIECE 39Interchangeable
interchangeable cross-reference
interchangeable
AS568-458 B46Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-392N674-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-392N674-70?
2-392N674-70 is a O-RING.
What parts can replace 2-392N674-70?
There are 10 known substitutes for 2-392N674-70: PRP568-458-4067-70, 2-458 N304-75, MS28775-458 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-392N674-70?
2-392N674-70 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-162-4704. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-392N674-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026