PartsTable
Technical Data Sheet
Download PDF

2-335E515-8 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-335E515-8: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN, criticality_code_justification: ZZZY, reference_number_differentiating_characteristics: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-914-1116, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-335E515-8
NSN: 5331-00-914-1116
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
criticality_code_justificationZZZY
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5331-00-914-1116
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-335E515-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
CENTER HOLE DIAMETER: 2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.210 INCHES MAXIMUM IN
CRITICALITY CODE JUSTIFICATIONZZZY
CENTER HOLE DIAMETER2.710 INCHES MINIMUM AND 2.740 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
SUBSTITUTES & CROSS-REFERENCES 5
21-19588PC8CPReference document
Same NSN cross-reference
Reference document — Secondary reference
19134-11CPReference document
Same NSN cross-reference
Reference document — Secondary reference
2-335Reference document
Same NSN cross-reference
Reference document — Secondary reference
21-19588PC8Reference document
Same NSN cross-reference
Reference document — Secondary reference
19134-11Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-335E515-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-335E515-8?
2-335E515-8 is a O-RING.
What parts can replace 2-335E515-8?
There are 5 known substitutes for 2-335E515-8: 21-19588PC8CP, 19134-11CP, 2-335 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-335E515-8?
2-335E515-8 is cataloged in the U.S. Government catalog under NSN 5331-00-914-1116. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-335E515-8