The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN, special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0485NRP, center_hole_diameter: 2.250 INCHES NOMINAL IN.
This part is cataloged in the U.S. Government catalog under NSN 5331-01-109-5487, indicating validated use in U.S. government and defense logistics supply chains.
Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0485NRP
center_hole_diameter
2.250 INCHES NOMINAL IN
elongation_percentage
331 MAXIMUM
cross-sectional_height
0.188 INCHES NOMINAL IN
criticality_code_justification
ZZZY
reference_number_differentiating_characteristics
REFERENCE NUMBER DIFFERENTIATING MATERIAL WILL BE IN ACCORDANCE WITH NAVAL INVENTORY CONTROL POINT ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS AVAILABLE AT THE DLA ICP.
NSN
5331-01-109-5487
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.188 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
CENTER HOLE DIAMETER: 2.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
TEMP RATING
-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT
0.188 INCHES NOMINAL IN
OUTSIDE DIAMETER
2.617 INCHES MINIMUM AND 2.673 INCHES MAXIMUM IN
HARDNESS RATING
70.0 SHORE DUROMETER A NOMINAL
CRITICALITY CODE JUSTIFICATION
ZZZY
ELONGATION PERCENTAGE
331 MAXIMUM
SPECIAL FEATURES
ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER PHILADELPHIAPRODUCTION STANDARD NO. PO0485NRP
CENTER HOLE DIAMETER
2.250 INCHES NOMINAL IN
TEST DATA DOCUMENT
81349-MIL-P-23199 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
MATERIAL
RUBBER SYNTHETIC
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-331 47-741?
2-331 47-741 is a O-RING.
What parts can replace 2-331 47-741?
There are 5 known substitutes for 2-331 47-741: 2-331-47071, 3P00485NRP, 8910W-1/2-738 PIECE 12 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-331 47-741?
2-331 47-741 is cataloged in the U.S. Government catalog under NSN 5331-01-109-5487. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.