PartsTable
Technical Data Sheet
Download PDF

2-330 NM304-75 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-330 NM304-75: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYURETHANE, center_hole_diameter: 2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-026-2913, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-330 NM304-75
NSN: 5331-01-026-2913
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialPLASTIC POLYURETHANE
center_hole_diameter2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
NSN5331-01-026-2913
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-330 NM304-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
•
MATERIAL: PLASTIC POLYURETHANE
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
CENTER HOLE DIAMETER2.090 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
MATERIALPLASTIC POLYURETHANE
SUBSTITUTES & CROSS-REFERENCES 5
N-576REVA PIECE 18Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
6227-33Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-330Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-330 1305Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-330-N034-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-330 NM304-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-330 NM304-75?
2-330 NM304-75 is a O-RING.
What parts can replace 2-330 NM304-75?
There are 5 known substitutes for 2-330 NM304-75: N-576REVA PIECE 18, 6227-33, 2-330 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-330 NM304-75?
2-330 NM304-75 is cataloged in the U.S. Government catalog under NSN 5331-01-026-2913. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-330 NM304-75