PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-300-146-01
2-300-146-01 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SEAL,PLAIN ENCASED is a the manufacturer industrial component. Key specifications include material: STEEL CASE, case_style: SQUARE, seal_width: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN, housing_bore_diameter: 1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN, sealing_element_style: ANGULAR, accommodated_shaft_diameter: 0.804 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-983-0555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-300-146-01
NSN: 5330-00-983-0555
FSC: 5330
CAGE: 99193 — HONEYWELL INTERNATIONAL INC. DBA HONEYWELL INTERNATIONAL DIV AEROSPACE - PHOENIX (USA)
SPECIFICATIONS
materialSTEEL CASE
case_styleSQUARE
seal_width0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
housing_bore_diameter1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
sealing_element_styleANGULAR
accommodated_shaft_diameter0.804 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
NSN5330-00-983-0555
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-300-146-01 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CASE STYLE: SQUARE
•
SEAL WIDTH: 0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
•
SEALING ELEMENT STYLE: ANGULAR
•
MATERIAL: RUBBER SYNTHETIC SEALING ELEMENT
•
ACCOMMODATED SHAFT DIAMETER: 0.804 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
•
HOUSING BORE DIAMETER: 1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CASE STYLESQUARE
SEAL WIDTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM IN
SEALING ELEMENT STYLEANGULAR
MATERIALRUBBER SYNTHETIC SEALING ELEMENT
MATERIALSTEEL CASE
ACCOMMODATED SHAFT DIAMETER0.804 INCHES MINIMUM AND 0.842 INCHES MAXIMUM IN
HOUSING BORE DIAMETER1.377 INCHES MINIMUM AND 1.381 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
4034Interchangeable
interchangeable cross-reference
interchangeable
A-A-59214-1C9Interchangeable
interchangeable cross-reference
interchangeable
A-A-59214Interchangeable
interchangeable cross-reference
interchangeable
54151-3-4Interchangeable
interchangeable cross-reference
interchangeable
GGG-D-296 TY1SEAInterchangeable
interchangeable cross-reference
interchangeable
31181Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-300-146-01?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-300-146-01?
2-300-146-01 is a SEAL,PLAIN ENCASED.
What parts can replace 2-300-146-01?
There are 20 known substitutes for 2-300-146-01: 4034, A-A-59214-1C9, A-A-59214 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-300-146-01?
2-300-146-01 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-983-0555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-300-146-01

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026