PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-28984PC54
2-28984PC54 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-892-4222, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-28984PC54
NSN: 5331-00-892-4222
FSC: 5331 — O-RING
CAGE: 09647 — AQUA-CHEM, INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-892-4222
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-28984PC54 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.357 INCHES MINIMUM AND 0.367 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
820-4-50001-79Interchangeable
interchangeable cross-reference
interchangeable
MILG21610Interchangeable
interchangeable cross-reference
interchangeable
820-4-80002-524Interchangeable
interchangeable cross-reference
interchangeable
820-4-80002PC525Interchangeable
interchangeable cross-reference
interchangeable
820-4-80002-525Interchangeable
interchangeable cross-reference
interchangeable
75G8R6012Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-28984PC54?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-28984PC54?
2-28984PC54 is a O-RING.
What parts can replace 2-28984PC54?
There are 18 known substitutes for 2-28984PC54: 820-4-50001-79, MILG21610, 820-4-80002-524 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-28984PC54?
2-28984PC54 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-892-4222. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-28984PC54

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026