PartsTable
Technical Data Sheet
Download PDF

2-275 E0540-80 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-275 E0540-80: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, special_features: SAE AS568-275 STANDARD SIZE, center_hole_diameter: 10.484 INCHES NOMINAL IN, cross-sectional_height: 0.139 INCHES NOMINAL IN, material_document_and_classification: E540-80 MFR REF SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-554-5555, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-275 E0540-80
NSN: 5331-01-554-5555
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
special_featuresSAE AS568-275 STANDARD SIZE
center_hole_diameter10.484 INCHES NOMINAL IN
cross-sectional_height0.139 INCHES NOMINAL IN
material_document_and_classificationE540-80 MFR REF SINGLE MATERIAL RESPONSE
NSN5331-01-554-5555
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-275 E0540-80 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.139 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: E540-80 MFR REF SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 10.484 INCHES NOMINAL IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.139 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONE540-80 MFR REF SINGLE MATERIAL RESPONSE
SPECIAL FEATURESSAE AS568-275 STANDARD SIZE
CENTER HOLE DIAMETER10.484 INCHES NOMINAL IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
2-275E540-80Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-275 E0540-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-275 E0540-80?
2-275 E0540-80 is a O-RING.
What parts can replace 2-275 E0540-80?
There is 1 known substitute for 2-275 E0540-80: 2-275E540-80. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-275 E0540-80?
2-275 E0540-80 is cataloged in the U.S. Government catalog under NSN 5331-01-554-5555. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-275 E0540-80