PartsTable
Technical Data Sheet
Download PDF

2-2486-6 — PARTS KIT,LINEAR DIRECTIONAL CON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2-2486-6: PARTS KIT,LINEAR DIRECTIONAL CON.

PARTS KIT,LINEAR DIRECTIONAL CON. Key specifications include material: STEEL OVERALL, hole_diameter: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN, hardness_rating: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM, outside_diameter: 0.296 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: CADMIUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-764-5694, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-2486-6
NSN: 5310-00-764-5694
NIINs: 007645694, 012616823
FSC: 5310 — Nuts and Washers
CAGE: 08683 — BROCKWAY MOTOR TRUCKS DIV OF MACK TRUCKS INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
hole_diameter0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
hardness_rating45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
outside_diameter0.296 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentCADMIUM OVERALL
material_thickness0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-00-764-5694
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2-2486-6 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
OUTSIDE DIAMETER: 0.296 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
HOLE DIAMETER: 0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING45.0 ROCKWELL C MINIMUM AND 53.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
OUTSIDE DIAMETER0.296 INCHES MAXIMUM IN
MATERIAL THICKNESS0.040 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
HOLE DIAMETER0.168 INCHES MINIMUM AND 0.178 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 7
121841Reference document
Same NSN cross-reference
Reference document — Secondary reference
34802S7Reference document
Same NSN cross-reference
Reference document — Secondary reference
1900788Reference document
Same NSN cross-reference
Reference document — Secondary reference
12Z3038-21Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
34802S8Reference document
Same NSN cross-reference
Reference document — Secondary reference
1978HXReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 2-2486-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-2486-6?
2-2486-6 is a PARTS KIT,LINEAR DIRECTIONAL CON.
What parts can replace 2-2486-6?
There are 7 known substitutes for 2-2486-6: 121841, 34802S7, 1900788 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-2486-6?
2-2486-6 is cataloged in the U.S. Government catalog under NSN 5310-00-764-5694. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-2486-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.