PartsTable
Technical Data Sheet
Download PDF

2-242N951-75 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-242N951-75: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 3.969 INCHES MINIMUM AND 3.999 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-508-1373, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-242N951-75
NSN: 5331-00-508-1373
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
hardness_rating75.0 SHORE DUROMETER A NOMINAL
center_hole_diameter3.969 INCHES MINIMUM AND 3.999 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-508-1373
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-242N951-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 3.969 INCHES MINIMUM AND 3.999 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER3.969 INCHES MINIMUM AND 3.999 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OR RUBBER POLYESTER URETHANE CLASS AU OR RUBBER POLYETHER URETHANE CLASS EU
SUBSTITUTES & CROSS-REFERENCES 3
IPD1H6227Reference document
Same NSN cross-reference
Reference document — Secondary reference
A27507Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
8T4404Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-242N951-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-242N951-75?
2-242N951-75 is a O-RING.
What parts can replace 2-242N951-75?
There are 3 known substitutes for 2-242N951-75: IPD1H6227, A27507, 8T4404. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-242N951-75?
2-242N951-75 is cataloged in the U.S. Government catalog under NSN 5331-00-508-1373. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-242N951-75