PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-240 V884-75
2-240 V884-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include color: BLACK, material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.171 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN, special_features: FLIGHT SAFETY CRITICAL AIRCRAFT PART. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-165-1958, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-240 V884-75
NSN: 5331-00-165-1958
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
colorBLACK
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter1.171 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN
special_featuresFLIGHT SAFETY CRITICAL AIRCRAFT PART
center_hole_diameter1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
material_document_and_classificationMIL-R-83248 TYPE I, CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPACKING,PREFORMED-"O"RING, MIL-R-83248, 75 DUROMETER
NSN5331-00-165-1958
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-240 V884-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 3.706 INCHES MINIMUM AND 3.762 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 3.976 INCHES MINIMUM AND 4.048 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER3.706 INCHES MINIMUM AND 3.762 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER3.976 INCHES MINIMUM AND 4.048 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
M83248/1-024Interchangeable
interchangeable cross-reference
interchangeable
RWS-568-024Interchangeable
interchangeable cross-reference
interchangeable
407703Interchangeable
interchangeable cross-reference
interchangeable
1000-013PC18Interchangeable
interchangeable cross-reference
interchangeable
2-240N304-75Interchangeable
interchangeable cross-reference
interchangeable
2300-446 PC 48Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-240 V884-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-240 V884-75?
2-240 V884-75 is a O-RING.
What parts can replace 2-240 V884-75?
There are 18 known substitutes for 2-240 V884-75: M83248/1-024, RWS-568-024, 407703 and 15 more. Substitute compatibility should be verified for your specific system.
Is 2-240 V884-75 still available?
2-240 V884-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-240 V884-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026