2-234S604-70 — CLAMP,CABLE,ELECTRICAL CONNECTOR

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-234S604-70: CLAMP,CABLE,ELECTRICAL CONNECTOR.

CLAMP,CABLE,ELECTRICAL CONNECTOR. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 3.262 INCHES NOMINAL IN, center_hole_diameter: 2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-902-0401, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-234S604-70

NSN: 5331-00-902-0401
NIINs: 009020401, 016464956
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	3.262 INCHES NOMINAL IN
center_hole_diameter	2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
end_item_identification	P-8A POSEIDON AIRCRAFT A
part_name_assigned_by_controlling_agency	CLAMP,CABLE,STRAIGHT
NSN	5331-00-902-0401

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 3.262 INCHES NOMINAL IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TYPICAL APPLICATIONS

Server Internal Cabling
Data Center Cable Infrastructure
SAS/SATA Drive Connectivity

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
OUTSIDE DIAMETER	3.262 INCHES NOMINAL IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	2.969 INCHES MINIMUM AND 2.999 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 9

AS3582-234Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

10333230Reference document

Same NSN cross-reference

Reference document — Informative reference only

AS234S59-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

07A568-234SSame NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

MS9068-234Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2-234S604-70?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-234S604-70?

2-234S604-70 is a CLAMP,CABLE,ELECTRICAL CONNECTOR.

What parts can replace 2-234S604-70?

There are 9 known substitutes for 2-234S604-70: AS3582-234, 10333230, AS234S59-70 and 6 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-234S604-70?

2-234S604-70 is cataloged in the U.S. Government catalog under NSN 5331-00-902-0401. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-234S604-70 — CLAMP,CABLE,ELECTRICAL CONNECTOR

Request a Quote — 2-234S604-70