PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-228N525-60
2-228N525-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM, center_hole_diameter: 2.214 INCHES MINIMUM AND 2.254 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN, material_document_and_classification: N525-60, CAGEC 02697 MFR REF SINGLE MATERIAL RESPONSE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-385-7870, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-228N525-60
NSN: 5331-01-385-7870
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM
center_hole_diameter2.214 INCHES MINIMUM AND 2.254 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
material_document_and_classificationN525-60, CAGEC 02697 MFR REF SINGLE MATERIAL RESPONSE
NSN5331-01-385-7870
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-228N525-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM
•
CENTER HOLE DIAMETER: 2.214 INCHES MINIMUM AND 2.254 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
MATERIAL DOCUMENT AND CLASSIFICATION: N525-60, CAGEC 02697 MFR REF SINGLE MATERIAL RESPONSE
•
TEMP RATING: -25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM
CENTER HOLE DIAMETER2.214 INCHES MINIMUM AND 2.254 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
MATERIAL DOCUMENT AND CLASSIFICATIONN525-60, CAGEC 02697 MFR REF SINGLE MATERIAL RESPONSE
TEMP RATING-25.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
878228Interchangeable
interchangeable cross-reference
interchangeable
10480932Interchangeable
interchangeable cross-reference
interchangeable
AS568-228MIL-G- 23652 TY 1Interchangeable
interchangeable cross-reference
interchangeable
568-228Interchangeable
interchangeable cross-reference
interchangeable
D2000 GR M2AA810A13EA14F17Interchangeable
interchangeable cross-reference
interchangeable
2-228E540-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-228N525-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-228N525-60?
2-228N525-60 is a O-RING.
What parts can replace 2-228N525-60?
There are 18 known substitutes for 2-228N525-60: 878228, 10480932, AS568-228MIL-G- 23652 TY 1 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-228N525-60?
2-228N525-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-385-7870. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-228N525-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026