PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-217N304-75
2-217N304-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200, peripheral_diameter: 1.449 INCHES NOMINAL IN, center_hole_diameter: 1.159 INCHES MINIMUM AND 1.183 INCHES MAXIMUM IN, cross-sectional_height: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-054-6880, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-217N304-75
NSN: 5331-00-054-6880
FSC: 5331 — O-RING
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
peripheral_diameter1.449 INCHES NOMINAL IN
center_hole_diameter1.159 INCHES MINIMUM AND 1.183 INCHES MAXIMUM IN
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-00-054-6880
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-217N304-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 4.219 INCHES MINIMUM AND 4.249 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER4.219 INCHES MINIMUM AND 4.249 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
186622Interchangeable
interchangeable cross-reference
interchangeable
5165519Interchangeable
interchangeable cross-reference
interchangeable
50048Interchangeable
interchangeable cross-reference
interchangeable
508-5562718 ITEInterchangeable
interchangeable cross-reference
interchangeable
SK-5000-13Interchangeable
interchangeable cross-reference
interchangeable
154098Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-217N304-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-217N304-75?
2-217N304-75 is a PACKING,PREFORMED.
What parts can replace 2-217N304-75?
There are 30 known substitutes for 2-217N304-75: 186622, 5165519, 50048 and 27 more. Substitute compatibility should be verified for your specific system.
Is 2-217N304-75 still available?
2-217N304-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-217N304-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026