2-216
✓ Verified by PartsTable
Trevi · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The LOAD BANK,ELECTRICAL is a Trevi industrial component. Key specifications include color: BLACK OVERALL, width: 8.000 INCHES NOMINAL IN, height: 21.000 INCHES NOMINAL IN, length: 22.000 INCHES NOMINAL IN, diameter: 0.6878 INCHES MINIMUM AND 0.6884 INCHES MAXIMUM IN, material: STEEL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-054-6940, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MRO →
MRO_GENERAL →
2-216
NSN: 5331-00-054-6940 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
color BLACK OVERALL width 8.000 INCHES NOMINAL IN height 21.000 INCHES NOMINAL IN length 22.000 INCHES NOMINAL IN diameter 0.6878 INCHES MINIMUM AND 0.6884 INCHES MAXIMUM IN material STEEL end_style 90 DEGREE PARALLEL base_style SINGLE CONTACT BAYONET CANDELABRA body_width 1.750 INCHES NOMINAL IN bore_shape STRAIGHT bulb_style S (STRAIGHT SIDE) ring_style INTERNAL STEPPED NSN 5331-00-054-6940
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2-216
MFR: Trevi
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
• ELONGATION PERCENTAGE: 125 MAXIMUM
• OUTSIDE DIAMETER: 1.387 INCHES NOMINAL IN
• CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
• CENTER HOLE DIAMETER: 1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR HARDNESS RATING 75.0 SHORE DUROMETER A NOMINAL ELONGATION PERCENTAGE 125 MAXIMUM OUTSIDE DIAMETER 1.387 INCHES NOMINAL IN CROSS-SECTIONAL HEIGHT 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN CENTER HOLE DIAMETER 1.103 INCHES MINIMUM AND 1.115 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 30
2651-6L1 Interchangeable interchangeable cross-reference
interchangeable
225-6 Interchangeable interchangeable cross-reference
interchangeable
AE369-6 Interchangeable interchangeable cross-reference
interchangeable
579-2 Interchangeable interchangeable cross-reference
interchangeable
R579-2 Interchangeable interchangeable cross-reference
interchangeable
95J3K0 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2-216?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-216?
2-216 is a LOAD BANK,ELECTRICAL manufactured by Trevi. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2-216?
There are 30 known substitutes for 2-216: 2651-6L1, 225-6, AE369-6 and 27 more. Substitute compatibility should be verified for your specific system.
Is 2-216 still available?
2-216 is currently cancelled.