PartsTable / O-RING / 2-213N103-7
2-213N103-7
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN, cross-sectional_height: 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-599-0982, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
2-213N103-7
NSN: 5331-00-599-0982 FSC: 5331 — O-RINGCAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
material RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR hardness_rating 70.0 SHORE DUROMETER A NOMINAL center_hole_diameter 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN cross-sectional_height 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN NSN 5331-00-599-0982
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: 2-213N103-7
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
• CROSS-SECTIONAL HEIGHT: 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN
• MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
• CENTER HOLE DIAMETER: 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
HARDNESS RATING 70.0 SHORE DUROMETER A NOMINAL CROSS-SECTIONAL HEIGHT 0.121 INCHES MINIMUM AND 0.129 INCHES MAXIMUM IN MATERIAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR CENTER HOLE DIAMETER 0.930 INCHES MINIMUM AND 0.950 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 21
331 Interchangeable interchangeable cross-reference
interchangeable
2213 Interchangeable interchangeable cross-reference
interchangeable
N-YGN-34 Interchangeable interchangeable cross-reference
interchangeable
SL4258PC8 Interchangeable interchangeable cross-reference
interchangeable
170977F Interchangeable interchangeable cross-reference
interchangeable
S3145 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy 2-213N103-7?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-213N103-7?
2-213N103-7 is a O-RING.
What parts can replace 2-213N103-7?
There are 21 known substitutes for 2-213N103-7: 331, 2213, N-YGN-34 and 18 more. Substitute compatibility should be verified for your specific system.
Is 2-213N103-7 still available?
2-213N103-7 is currently cancelled.
Request a Quote — 2-213N103-7