PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-2 5-8X3-4X0-080INCH
2-2 5-8X3-4X0-080INCH ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STRAP,RETAINING is a the manufacturer industrial component. Key specifications include cushion: NOT INCLUDED, material: STEEL LOCATION NOT OTHERWISE SPECIFIED, mounting_pad: NOT INCLUDED, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 2.625 INCHES NOMINAL IN, style_designator: CURVED ARCH. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-196-2709, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-2 5-8X3-4X0-080INCH
NSN: 5340-00-196-2709
FSC: 5340
CAGE: 72629 — GENERAL CABLE CO DIV OF GK TECHNOLOGIES INC DIAMOND EXPANSION BOLT CO DIV (USA)
SPECIFICATIONS
cushionNOT INCLUDED
materialSTEEL LOCATION NOT OTHERWISE SPECIFIED
mounting_padNOT INCLUDED
overall_width0.750 INCHES NOMINAL IN
overall_length2.625 INCHES NOMINAL IN
style_designatorCURVED ARCH
surface_treatmentZINC
material_thickness0.080 INCHES NOMINAL IN
mounting_hole_size0.281 INCHES NOMINAL IN
inside_diameter/arch_length1.125 INCHES NOMINAL IN
distance_between_base_and_inside_of_arch1.125 INCHES NOMINAL IN
center_to_center_distance_between_arch_and_mounting_hole1.2325 INCHES NOMINAL IN
NSN5340-00-196-2709
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-2 5-8X3-4X0-080INCH MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUSHION: NOT INCLUDED
•
MOUNTING PAD: NOT INCLUDED
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
SURFACE TREATMENT: ZINC
•
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE: 1.2325 INCHES NOMINAL IN
•
MOUNTING HOLE SIZE: 0.281 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CUSHIONNOT INCLUDED
MOUNTING PADNOT INCLUDED
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
SURFACE TREATMENTZINC
CENTER TO CENTER DISTANCE BETWEEN ARCH AND MOUNTING HOLE1.2325 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
MOUNTING HOLE SIZE0.281 INCHES NOMINAL IN
DISTANCE BETWEEN BASE AND INSIDE OF ARCH1.125 INCHES NOMINAL IN
MATERIAL THICKNESS0.080 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
11040Interchangeable
interchangeable cross-reference
interchangeable
3218348 PIECE 14Interchangeable
interchangeable cross-reference
interchangeable
R-345PC14Interchangeable
interchangeable cross-reference
interchangeable
GC503H3Interchangeable
interchangeable cross-reference
interchangeable
L1-8Interchangeable
interchangeable cross-reference
interchangeable
QB79050-8Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-2 5-8X3-4X0-080INCH?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-2 5-8X3-4X0-080INCH?
2-2 5-8X3-4X0-080INCH is a STRAP,RETAINING.
What parts can replace 2-2 5-8X3-4X0-080INCH?
There are 8 known substitutes for 2-2 5-8X3-4X0-080INCH: 11040, 3218348 PIECE 14, R-345PC14 and 5 more. Substitute compatibility should be verified for your specific system.
Is 2-2 5-8X3-4X0-080INCH still available?
2-2 5-8X3-4X0-080INCH is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-2 5-8X3-4X0-080INCH

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026