PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-167S613-60
2-167S613-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL, outside_diameter: 7.193 INCHES NOMINAL IN, center_hole_diameter: 6.947 INCHES MINIMUM AND 7.027 INCHES MAXIMUM IN, cross-sectional_height: 0.093 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-547-3845, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-167S613-60
NSN: 5331-00-547-3845
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
temp_rating-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
hardness_rating60.0 SHORE DUROMETER A NOMINAL
outside_diameter7.193 INCHES NOMINAL IN
center_hole_diameter6.947 INCHES MINIMUM AND 7.027 INCHES MAXIMUM IN
cross-sectional_height0.093 INCHES NOMINAL IN
NSN5331-00-547-3845
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-167S613-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
•
OUTSIDE DIAMETER: 7.193 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.093 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 6.947 INCHES MINIMUM AND 7.027 INCHES MAXIMUM IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING-60.0 FAHRENHEIT AND 450.0 FAHRENHEIT DEGF
OUTSIDE DIAMETER7.193 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.093 INCHES NOMINAL IN
CENTER HOLE DIAMETER6.947 INCHES MINIMUM AND 7.027 INCHES MAXIMUM IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
0J/C29000010Interchangeable
interchangeable cross-reference
interchangeable
AS568-010 3CH915B34EO16EO36Interchangeable
interchangeable cross-reference
interchangeable
AS568BInterchangeable
interchangeable cross-reference
interchangeable
2-016N163-70Interchangeable
interchangeable cross-reference
interchangeable
AS568-016Interchangeable
interchangeable cross-reference
interchangeable
ASTM-D2000-2003AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-167S613-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-167S613-60?
2-167S613-60 is a O-RING.
What parts can replace 2-167S613-60?
There are 24 known substitutes for 2-167S613-60: 0J/C29000010, AS568-010 3CH915B34EO16EO36, AS568B and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-167S613-60?
2-167S613-60 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-547-3845. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-167S613-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026