PartsTable
Technical Data Sheet
Download PDF

2-16708-1 — PIN,SHOULDER,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2-16708-1: PIN,SHOULDER,HEADLESS.

The PIN,SHOULDER,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, shank_length: 0.700 INCHES NOMINAL IN, overall_length: 1.750 INCHES NOMINAL IN, shank_diameter: 0.250 INCHES NOMINAL IN, surface_finish: 32.0 MICROINCHES OUTSIDE DIAMETER, first_end_style: CHAMFERED. This part is cataloged in the U.S.

Government catalog under NSN 5315-00-709-4130, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-16708-1
NSN: 5315-00-709-4130
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
shank_length0.700 INCHES NOMINAL IN
overall_length1.750 INCHES NOMINAL IN
shank_diameter0.250 INCHES NOMINAL IN
surface_finish32.0 MICROINCHES OUTSIDE DIAMETER
first_end_styleCHAMFERED
second_end_styleCHAMFERED
style_designatorSHOULDER
shoulder_diameter0.350 INCHES NOMINAL IN
surface_treatmentCADMIUM OVERALL
first_end_locationTHREADED END
second_shank_length0.900 INCHES NOMINAL IN
NSN5315-00-709-4130
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2-16708-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
SECOND SHANK DIAMETER: 0.250 INCHES NOMINAL IN
•
SURFACE FINISH: 32.0 MICROINCHES OUTSIDE DIAMETER
•
FIRST END TAPER LENGTH: 0.018 INCHES NOMINAL IN
•
FIRST END LOCATION: THREADED END
•
FIRST END STYLE: CHAMFERED
•
SHANK LENGTH: 0.700 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SHOULDER
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.250 INCHES NOMINAL IN
SECOND SHANK DIAMETER0.250 INCHES NOMINAL IN
SURFACE FINISH32.0 MICROINCHES OUTSIDE DIAMETER
FIRST END TAPER LENGTH0.018 INCHES NOMINAL IN
FIRST END LOCATIONTHREADED END
FIRST END STYLECHAMFERED
SHANK LENGTH0.700 INCHES NOMINAL IN
STYLE DESIGNATORSHOULDER
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6758,C4 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.750 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 2-16708-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-16708-1?
2-16708-1 is a PIN,SHOULDER,HEADLESS.
What is the NSN for 2-16708-1?
2-16708-1 is cataloged in the U.S. Government catalog under NSN 5315-00-709-4130. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-16708-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.