PartsTable
Technical Data Sheet
Download PDF

2-164 E1267-80 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-164 E1267-80: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 6.197 INCHES MINIMUM AND 6.277 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, end_item_identification: FORWARD PROPULSION SECTION ASSEMBLY. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-529-6786, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-164 E1267-80
NSN: 5331-01-529-6786
FSC: 5331 — O-ring
CAGE: 30780 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV TUBE FITTINGS DIVISION (USA)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
center_hole_diameter6.197 INCHES MINIMUM AND 6.277 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
end_item_identificationFORWARD PROPULSION SECTION ASSEMBLY
NSN5331-01-529-6786
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-164 E1267-80 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 6.197 INCHES MINIMUM AND 6.277 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
TECHNICAL CHARACTERISTICS
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER6.197 INCHES MINIMUM AND 6.277 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONFORWARD PROPULSION SECTION ASSEMBLY
MATERIALRUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
7385926 FIND NO. 281Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-164 E1267-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-164 E1267-80?
2-164 E1267-80 is a O-RING.
What parts can replace 2-164 E1267-80?
There is 1 known substitute for 2-164 E1267-80: 7385926 FIND NO. 281. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-164 E1267-80?
2-164 E1267-80 is cataloged in the U.S. Government catalog under NSN 5331-01-529-6786. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-164 E1267-80