PartsTable
Technical Data Sheet
Download PDF

2-159 S1224 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-159 S1224: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 4.953 INCHES MINIMUM AND 5.022 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, material_document_and_classification: ZZ-R-765 CL2A 2B GR70 FED SPEC SINGLE MATERIAL RESPONSE. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-529-0537, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-159 S1224
NSN: 5331-01-529-0537
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter4.953 INCHES MINIMUM AND 5.022 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
material_document_and_classificationZZ-R-765 CL2A 2B GR70 FED SPEC SINGLE MATERIAL RESPONSE
NSN5331-01-529-0537
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-159 S1224 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 CL2A 2B GR70 FED SPEC SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 4.953 INCHES MINIMUM AND 5.022 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 CL2A 2B GR70 FED SPEC SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER4.953 INCHES MINIMUM AND 5.022 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 2
S1224 2-159Reference document
Same NSN cross-reference
Reference document — Secondary reference
S1224-2-159-70Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-159 S1224?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-159 S1224?
2-159 S1224 is a O-RING.
What parts can replace 2-159 S1224?
There are 2 known substitutes for 2-159 S1224: S1224 2-159, S1224-2-159-70. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-159 S1224?
2-159 S1224 is cataloged in the U.S. Government catalog under NSN 5331-01-529-0537. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-159 S1224