PartsTable
Technical Data Sheet
Download PDF

2-140L1223-60 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-140L1223-60: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROSILICONE CLASS FQ OVERALL, temp_rating: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF, hardness_rating: 60.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN, center_hole_diameter: 2.220 INCHES MINIMUM AND 2.254 INCHES MAXIMUM IN, end_item_identification: MODE-S SIX-PATH ASR ROTARY JOINT. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-038-2035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-140L1223-60
NSN: 5331-00-038-2035
NIINs: 000382035, 013129806
FSC: 5331 — O-ring
CAGE: 02679 — LORI CORP (USA)
SPECIFICATIONS
materialRUBBER FLUOROSILICONE CLASS FQ OVERALL
temp_rating-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
hardness_rating60.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
center_hole_diameter2.220 INCHES MINIMUM AND 2.254 INCHES MAXIMUM IN
end_item_identificationMODE-S SIX-PATH ASR ROTARY JOINT
cross-sectional_shape_styleO-RING
cross_section_outside_diameter0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-038-2035
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-140L1223-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
•
HARDNESS RATING: 60.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROSILICONE CLASS FQ
TECHNICAL CHARACTERISTICS
TEMP RATING-100.0 FAHRENHEIT AND 350.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.420 INCHES MINIMUM AND 2.466 INCHES MAXIMUM IN
HARDNESS RATING60.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER2.227 INCHES MINIMUM AND 2.247 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROSILICONE CLASS FQ
SUBSTITUTES & CROSS-REFERENCES 2
L0449 2-140Reference document
Same NSN cross-reference
Reference document — Secondary reference
GS570J2J140Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 2-140L1223-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-140L1223-60?
2-140L1223-60 is a PACKING,PREFORMED.
What parts can replace 2-140L1223-60?
There are 2 known substitutes for 2-140L1223-60: L0449 2-140, GS570J2J140. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-140L1223-60?
2-140L1223-60 is cataloged in the U.S. Government catalog under NSN 5331-00-038-2035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-140L1223-60