PartsTable
Technical Data Sheet
Download PDF

2-13617-5 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-13617-5: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, end_radius: 0.250 INCHES NOMINAL IN, fork_depth: 1.000 INCHES NOMINAL IN, thread_class: 3B ROD CONNECTION, hole_diameter: 0.194 INCHES NOMINAL IN, overall_width: 0.312 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-050-4440, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-13617-5
NSN: 5340-00-050-4440
NIINs: 000504440, 004472257
FSC: 5340 — Hardware, Commercial
CAGE: 79U29 — NORTHROP GRUMMAN SYSTEMS CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_radius0.250 INCHES NOMINAL IN
fork_depth1.000 INCHES NOMINAL IN
thread_class3B ROD CONNECTION
hole_diameter0.194 INCHES NOMINAL IN
overall_width0.312 INCHES NOMINAL IN
thread_length0.875 INCHES NOMINAL ROD CONNECTION IN
shank_diameter0.375 INCHES NOMINAL IN
fork_span_width0.141 INCHES NOMINAL IN
style_designatorCLEVIS
thread_directionRIGHT-HAND ROD CONNECTION
surface_treatmentCADMIUM OVERALL
NSN5340-00-050-4440
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-13617-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SHANK DIAMETER: 0.375 INCHES NOMINAL IN
•
FORK SPAN WIDTH: 0.141 INCHES NOMINAL IN
•
SECURING PIN HOLE DIAMETER: 0.094 INCHES NOMINAL IN
•
FORK ARM THICKNESS: 0.085 INCHES NOMINAL IN
•
END RADIUS: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.875 INCHES NOMINAL ROD CONNECTION IN
•
STYLE DESIGNATOR: CLEVIS
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-8617,COND B4-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS
SHANK DIAMETER0.375 INCHES NOMINAL IN
FORK SPAN WIDTH0.141 INCHES NOMINAL IN
SECURING PIN HOLE DIAMETER0.094 INCHES NOMINAL IN
FORK ARM THICKNESS0.085 INCHES NOMINAL IN
END RADIUS0.250 INCHES NOMINAL IN
THREAD LENGTH0.875 INCHES NOMINAL ROD CONNECTION IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-8617,COND B4-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.312 INCHES NOMINAL IN
THREAD DIRECTIONRIGHT-HAND ROD CONNECTION
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-13617-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-13617-5?
2-13617-5 is a CLEVIS,ROD END.
What is the NSN for 2-13617-5?
2-13617-5 is cataloged in the U.S. Government catalog under NSN 5340-00-050-4440. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-13617-5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.