PartsTable
Technical Data Sheet
Download PDF

2-122-5-10-005-06 — NUT,PLAIN,HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

2-122-5-10-005-06: NUT,PLAIN,HEXAGON.

The NUT,PLAIN,HEXAGON is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: HEXAGON, nut_height: 0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN, thread_class: 2B, thread_series: UNIFIED NATIONAL COARSE (UNC), thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-656-6974, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-122-5-10-005-06
NSN: 5310-01-656-6974
FSC: 5310 — Nuts and Washers
CAGE: 6LE50 — FLUID HANDLING LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleHEXAGON
nut_height0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
thread_class2B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
thread_directionRIGHT-HAND
width_across_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
nominal_thread_size0.625 INCHES IN
bearing_surface_typeCHAMFERED OR FLAT OR WASHER FACED
thread_quantity_per_inch11
inside_width_across_flats0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
part_name_assigned_by_controlling_agencyHEX NUT
NSN5310-01-656-6974
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 2-122-5-10-005-06 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.625 INCHES IN
•
NUT HEIGHT: 0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
•
INSIDE WIDTH ACROSS FLATS: 0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
•
NUT STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.625 INCHES IN
NUT HEIGHT0.535 INCHES MINIMUM AND 0.559 INCHES MAXIMUM IN
INSIDE WIDTH ACROSS FLATS0.922 INCHES MINIMUM AND 0.938 INCHES MAXIMUM IN
PART NAME ASSIGNED BY CONTROLLING AGENCYHEX NUT
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH11
SUBSTITUTES & CROSS-REFERENCES 2
5 046 08 060 121Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
5-046-08-060-121PC12Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-122-5-10-005-06?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-122-5-10-005-06?
2-122-5-10-005-06 is a NUT,PLAIN,HEXAGON.
What parts can replace 2-122-5-10-005-06?
There are 2 known substitutes for 2-122-5-10-005-06: 5 046 08 060 121, 5-046-08-060-121PC12. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-122-5-10-005-06?
2-122-5-10-005-06 is cataloged in the U.S. Government catalog under NSN 5310-01-656-6974. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-122-5-10-005-06