PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-12-S613-60
2-12-S613-60 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, center_hole_diameter: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-990-8937, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-12-S613-60
NSN: 5331-00-990-8937
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q
center_hole_diameter0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-990-8937
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-12-S613-60 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SILICONE CLASS Q
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.359 INCHES MINIMUM AND 0.369 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER SILICONE CLASS Q
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
2-012S613-6Interchangeable
interchangeable cross-reference
interchangeable
2-12S418-6Interchangeable
interchangeable cross-reference
interchangeable
802-6099-3/8Interchangeable
Same NIIN cross-reference
interchangeable
1602321-56Interchangeable
Same NIIN cross-reference
interchangeable
11-012Interchangeable
Same NIIN cross-reference
interchangeable
1065300G4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-12-S613-60?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-12-S613-60?
2-12-S613-60 is a O-RING.
What parts can replace 2-12-S613-60?
There are 6 known substitutes for 2-12-S613-60: 2-012S613-6, 2-12S418-6, 802-6099-3/8 and 3 more. Substitute compatibility should be verified for your specific system.
Is 2-12-S613-60 still available?
2-12-S613-60 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-12-S613-60

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026