PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-119E540-8
2-119E540-8 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN, center_hole_diameter: 0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-316-8015, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-119E540-8
NSN: 5331-00-316-8015
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
outside_diameter1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
center_hole_diameter0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-316-8015
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-119E540-8 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
•
CENTER HOLE DIAMETER: 0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
•
HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL
•
TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
CENTER HOLE DIAMETER0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
HARDNESS RATING80.0 SHORE DUROMETER A NOMINAL
TEMP RATING-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
100320Interchangeable
interchangeable cross-reference
interchangeable
CRS13G126KPInterchangeable
interchangeable cross-reference
interchangeable
356-0042Interchangeable
interchangeable cross-reference
interchangeable
MIL-E-16366Interchangeable
interchangeable cross-reference
interchangeable
321147Interchangeable
interchangeable cross-reference
interchangeable
MS21003-20Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-119E540-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-119E540-8?
2-119E540-8 is a O-RING.
What parts can replace 2-119E540-8?
There are 14 known substitutes for 2-119E540-8: 100320, CRS13G126KP, 356-0042 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-119E540-8?
2-119E540-8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-316-8015. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-119E540-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026