2-10N602-70 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-10N602-70: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN, special_features: OD IS 0.375 IN IN, center_hole_diameter: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-248-3835, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-10N602-70

NSN: 5331-00-248-3835
FSC: 5331 — O-ring
CAGE: D9854 — AVIQUIPO OF GERMAMY GMBH (DEU)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating	-70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
special_features	OD IS 0.375 IN IN
center_hole_diameter	0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-248-3835

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.368 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
SPECIAL FEATURES	OD IS 0.375 IN IN
CENTER HOLE DIAMETER	0.234 INCHES MINIMUM AND 0.244 INCHES MAXIMUM IN
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 7

MS29513-010Reference document

Same NSN cross-reference

Reference document — Secondary reference

725-70-010Reference document

Same NSN cross-reference

Reference document — Secondary reference

Q2534-10Reference document

Same NSN cross-reference

Reference document — Secondary reference

09083724Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

R909083724Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

946.91.27.310Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy 2-10N602-70?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-10N602-70?

2-10N602-70 is a O-RING.

What parts can replace 2-10N602-70?

There are 7 known substitutes for 2-10N602-70: MS29513-010, 725-70-010, Q2534-10 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-10N602-70?

2-10N602-70 is cataloged in the U.S. Government catalog under NSN 5331-00-248-3835. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-10N602-70 — O-RING

Request a Quote — 2-10N602-70