PartsTable
Technical Data Sheet
Download PDF

2-10LL — CATCH,CLAMPING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-10LL: CATCH,CLAMPING.

The CATCH,CLAMPING is a the manufacturer industrial component. Key specifications include catch_width: 1.594 INCHES NOMINAL IN, design_type: CLAW ENGAGING, overall_height: 0.594 INCHES NOMINAL IN, overall_length: 3.719 INCHES NOMINAL IN, wing_nut_width: 2.750 INCHES NOMINAL IN, operation_method: THUMB PIECE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-292-3612, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-10LL
NSN: 5340-01-292-3612
FSC: 5340 — Hardware, Commercial
CAGE: 94222 — SOUTHCO INC (USA)
SPECIFICATIONS
catch_width1.594 INCHES NOMINAL IN
design_typeCLAW ENGAGING
hole_quantity4
overall_height0.594 INCHES NOMINAL IN
overall_length3.719 INCHES NOMINAL IN
wing_nut_width2.750 INCHES NOMINAL IN
operation_methodTHUMB PIECE
special_featuresOPEN LENGTH 3.719 IN. CLOSED LENGTH 3.406 IN. IN
style_designatorSPECIAL
engaging_surface_width0.875 INCHES NOMINAL IN
NSN5340-01-292-3612
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-10LL MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: CLAW ENGAGING
•
ENGAGING SURFACE WIDTH: 0.875 INCHES NOMINAL IN
•
STYLE DESIGNATOR: SPECIAL
•
WING NUT WIDTH: 2.750 INCHES NOMINAL IN
•
CATCH WIDTH: 1.594 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.594 INCHES NOMINAL IN
DESIGN TYPECLAW ENGAGING
ENGAGING SURFACE WIDTH0.875 INCHES NOMINAL IN
STYLE DESIGNATORSPECIAL
OVERALL LENGTH3.719 INCHES NOMINAL IN
WING NUT WIDTH2.750 INCHES NOMINAL IN
CATCH WIDTH1.594 INCHES NOMINAL IN
SPECIAL FEATURESOPEN LENGTH 3.719 IN. CLOSED LENGTH 3.406 IN. IN
HOLE QUANTITY4
OPERATION METHODTHUMB PIECE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 4
9M137-2BSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
22-56-1688-07-00Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
2-10 LINK-LOCKReference document
Same NSN cross-reference
Reference document — Secondary reference
9M137-28Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-10LL?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-10LL?
2-10LL is a CATCH,CLAMPING.
What parts can replace 2-10LL?
There are 4 known substitutes for 2-10LL: 9M137-2B, 22-56-1688-07-00, 2-10 LINK-LOCK and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-10LL?
2-10LL is cataloged in the U.S. Government catalog under NSN 5340-01-292-3612. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-10LL

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.