PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-1036-2
2-1036-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL, hardness_rating: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL, peripheral_diameter: 14.000 INCHES NOMINAL IN, center_hole_diameter: 12.500 INCHES NOMINAL IN, elongation_percentage: 300 MAXIMUM, cross-sectional_height: 0.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-429-0118, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-1036-2
NSN: 5330-00-429-0118
FSC: 5330
CAGE: 60685 — SPECIALTY CABLE CORP DBA SPECIALTY CABLE CORP (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
hardness_rating55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
peripheral_diameter14.000 INCHES NOMINAL IN
center_hole_diameter12.500 INCHES NOMINAL IN
elongation_percentage300 MAXIMUM
cross-sectional_height0.750 INCHES NOMINAL IN
cross-sectional_thickness0.125 INCHES NOMINAL IN
cross-sectional_shape_styleCUP
material_document_and_classificationMIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-429-0118
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-1036-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.125 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: CUP
•
CROSS-SECTIONAL HEIGHT: 0.750 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 12.500 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 300 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
HARDNESS RATING: 55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL THICKNESS0.125 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLECUP
CROSS-SECTIONAL HEIGHT0.750 INCHES NOMINAL IN
CENTER HOLE DIAMETER12.500 INCHES NOMINAL IN
ELONGATION PERCENTAGE300 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-6855,GR 60 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
HARDNESS RATING55.0 SHORE DUROMETER A MINIMUM AND 65.0 SHORE DUROMETER A MAXIMUM OVERALL
PERIPHERAL DIAMETER14.000 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
2103-6Interchangeable
interchangeable cross-reference
interchangeable
125008-08Interchangeable
interchangeable cross-reference
interchangeable
2103-06-00Interchangeable
interchangeable cross-reference
interchangeable
2242Interchangeable
interchangeable cross-reference
interchangeable
21-019Interchangeable
interchangeable cross-reference
interchangeable
117141-000Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-1036-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-1036-2?
2-1036-2 is a PACKING,PREFORMED.
What parts can replace 2-1036-2?
There are 16 known substitutes for 2-1036-2: 2103-6, 125008-08, 2103-06-00 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-1036-2?
2-1036-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-429-0118. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-1036-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026