PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-10116

2-10116 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL COMP 631, end_style: 90 DEGREE PARALLEL, vial_type: BUBBLE, ring_style: STRAIGHT GAP, design_type: SINGLE FACE, usage_design: EXTERNAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-101-1772, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-10116
NSN: 3110-00-101-1772
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
materialSTEEL COMP 631
end_style90 DEGREE PARALLEL
vial_typeBUBBLE
ring_styleSTRAIGHT GAP
design_typeSINGLE FACE
usage_designEXTERNAL
adjustabilityNONADJUSTABLE
overall_width0.6250 INCHES NOMINAL IN
inside_diameter1.520 INCHES NOMINAL IN
outside_diameter1.680 INCHES NOMINAL IN
style_designatorNORMAL ANGLE
material_diameter0.080 INCHES NOMINAL IN
NSN3110-00-101-1772
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2-10116 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 2.3750 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0625 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER2.3750 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0625 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
OVERALL WIDTH0.6250 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
N8-2InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
0209985-1InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
230433InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
7767InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
15523InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
45InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-10116?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-10116?
2-10116 is a CUP,TAPERED ROLLER BEARING.
What parts can replace 2-10116?
There are 18 known substitutes for 2-10116: N8-2, 0209985-1, 230433 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-10116?
2-10116 is cataloged in the Federal Logistics Information System under NSN 3110-00-101-1772. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-10116

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026