PartsTable
Technical Data Sheet
PartsTable / MRO / 2-1001-1
2-1001-1 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include jaw_type: CURVED, material: STEEL CORROSION RESISTING OVERALL, tip_type: MOSQUITO POINT, grip_type: FINGER RING, nut_style: HEXAGON, body_style: CYLINDRICAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3107, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2-1001-1
NSN: 3110-00-100-3107
FSC: 3110
CAGE: 25681 — ITT GOULDS PUMPS, INC. (USA)
SPECIFICATIONS
jaw_typeCURVED
materialSTEEL CORROSION RESISTING OVERALL
tip_typeMOSQUITO POINT
grip_typeFINGER RING
nut_styleHEXAGON
body_styleCYLINDRICAL
cone_width1.1875 INCHES NOMINAL IN
jaw_length0.875 INCHES NOMINAL IN
joint_typeBOX LOCK
nut_height0.264 INCHES NOMINAL IN
body_length0.688 INCHES NOMINAL IN
thread_class2B
NSN3110-00-100-3107
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2-1001-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CONE CORNER RADIUS: 0.1406 INCHES NOMINAL IN
•
BORE DIAMETER: 1.5000 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
CONE WIDTH: 1.1875 INCHES NOMINAL IN
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NORMAL ANGLE
TECHNICAL CHARACTERISTICS (FLIS)
CONE CORNER RADIUS0.1406 INCHES NOMINAL IN
BORE DIAMETER1.5000 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
CONE WIDTH1.1875 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNORMAL ANGLE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
3876ADXInterchangeable
interchangeable cross-reference
interchangeable
3876Interchangeable
interchangeable cross-reference
interchangeable
9904130Interchangeable
interchangeable cross-reference
interchangeable
SU2702Interchangeable
interchangeable cross-reference
interchangeable
14-1202Interchangeable
interchangeable cross-reference
interchangeable
28772Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-1001-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-1001-1?
2-1001-1 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2-1001-1?
There are 20 known substitutes for 2-1001-1: 3876ADX, 3876, 9904130 and 17 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-1001-1?
2-1001-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-3107. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-1001-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026