PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 2-055-013-375
2-055-013-375 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 25.00 MILLIMETERS NOMINAL MM, overall_width: 1.0000 INCHES NOMINAL IN, load_direction: ANGULAR, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3370, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-055-013-375
NSN: 3110-00-554-3370
FSC: 3110
CAGE: 63097 — VIKING PUMP, INC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter25.00 MILLIMETERS NOMINAL MM
overall_width1.0000 INCHES NOMINAL IN
load_directionANGULAR
surface_finishGROUND
shield_quantity1
style_designatorLOADING GROOVE, NON-SEPARABLE
end_item_identificationLOGISTICS SUPPORT VESSEL
overall_outside_diameter62.00 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
NSN3110-00-554-3370
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 2-055-013-375 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE DIAMETER: 25.00 MILLIMETERS NOMINAL MM
•
OVERALL OUTSIDE DIAMETER: 62.00 MILLIMETERS NOMINAL MM
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
RETAINER FABRICATION METHOD: PRESSED
•
SURFACE FINISH: GROUND
•
INTERNAL FIT-UP CONTACT ANGULAR DIRECTION: OUTWARD CONVERGENT
•
LOAD DIRECTION: ANGULAR
TECHNICAL CHARACTERISTICS (FLIS)
BORE DIAMETER25.00 MILLIMETERS NOMINAL MM
OVERALL OUTSIDE DIAMETER62.00 MILLIMETERS NOMINAL MM
STANDARD TOLERANCE DESIGNATIONABEC NO.1
RETAINER FABRICATION METHODPRESSED
END ITEM IDENTIFICATIONLOGISTICS SUPPORT VESSEL
SURFACE FINISHGROUND
INTERNAL FIT-UP CONTACT ANGULAR DIRECTIONOUTWARD CONVERGENT
LOAD DIRECTIONANGULAR
SHIELD QUANTITY1
INTERNAL FIT-UP DESIGNATIONSTANDARD
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
714174Interchangeable
interchangeable cross-reference
interchangeable
63582R91Interchangeable
interchangeable cross-reference
interchangeable
5605X1Interchangeable
interchangeable cross-reference
interchangeable
5605X1AInterchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-055-013-375?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-055-013-375?
2-055-013-375 is a BEARING,BALL,ANNULAR.
What parts can replace 2-055-013-375?
There are 4 known substitutes for 2-055-013-375: 714174, 63582R91, 5605X1 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-055-013-375?
2-055-013-375 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-3370. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-055-013-375

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026