2-039 N506-65 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-039 N506-65: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 65.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.853 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN, center_hole_diameter: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-727-6160, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-039 N506-65

NSN: 5331-00-727-6160
FSC: 5331 — O-ring
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)

SPECIFICATIONS

material	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating	65.0 SHORE DUROMETER A NOMINAL
outside_diameter	2.853 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN
center_hole_diameter	2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
end_item_identification	HELICOPTER,SEA KING H-3;SUBMARINE SHIP CONTROL AND NAVIGATION SYSTEMS;OLIVER PERRY CLASS FFG;MOORED TRAINING SHIP;FORRESTAL CLASS CV;FIRE CONTROL SYSTEM,MK 92 (FCS)
NSN	5331-00-727-6160

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 2.853 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN

•

HARDNESS RATING: 65.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN

•

MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	2.853 INCHES MINIMUM AND 2.905 INCHES MAXIMUM IN
HARDNESS RATING	65.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	2.724 INCHES MINIMUM AND 2.754 INCHES MAXIMUM IN
END ITEM IDENTIFICATION	HELICOPTER,SEA KING H-3;SUBMARINE SHIP CONTROL AND NAVIGATION SYSTEMS;OLIVER PERRY CLASS FFG;MOORED TRAINING SHIP;FORRESTAL CLASS CV;FIRE CONTROL SYSTEM,MK 92 (FCS)
MATERIAL	RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR

SUBSTITUTES & CROSS-REFERENCES 6

ARP568-039Reference document

Same NSN cross-reference

Reference document — Secondary reference

SAE-AS3578Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS9021-039Reference document

Same NSN cross-reference

Reference document — Secondary reference

N0506 2-039Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS3578-039Reference document

Same NSN cross-reference

Reference document — Secondary reference

PRP568-039-4024-65Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 2-039 N506-65?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-039 N506-65?

2-039 N506-65 is a O-RING.

What parts can replace 2-039 N506-65?

There are 6 known substitutes for 2-039 N506-65: ARP568-039, SAE-AS3578, MS9021-039 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-039 N506-65?

2-039 N506-65 is cataloged in the U.S. Government catalog under NSN 5331-00-727-6160. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-039 N506-65 — O-RING

Request a Quote — 2-039 N506-65