PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-036S595-50
2-036S595-50 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -80.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 50.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.504 INCHES NOMINAL IN, center_hole_diameter: 2.354 INCHES MINIMUM AND 2.374 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-241-1073, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-036S595-50
NSN: 5331-00-241-1073
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER
temp_rating-80.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating50.0 SHORE DUROMETER A NOMINAL
outside_diameter2.504 INCHES NOMINAL IN
center_hole_diameter2.354 INCHES MINIMUM AND 2.374 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-241-1073
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-036S595-50 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.504 INCHES NOMINAL IN
•
HARDNESS RATING: 50.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER
•
CENTER HOLE DIAMETER: 2.354 INCHES MINIMUM AND 2.374 INCHES MAXIMUM IN
•
TEMP RATING: -80.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.504 INCHES NOMINAL IN
HARDNESS RATING50.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER
CENTER HOLE DIAMETER2.354 INCHES MINIMUM AND 2.374 INCHES MAXIMUM IN
TEMP RATING-80.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AMS 3302Interchangeable
interchangeable cross-reference
interchangeable
E0540 2-036Interchangeable
interchangeable cross-reference
interchangeable
AS568-036 2AA815A13F17EA14Interchangeable
interchangeable cross-reference
interchangeable
2-036E540-8Interchangeable
interchangeable cross-reference
interchangeable
5331PL0979396Interchangeable
interchangeable cross-reference
interchangeable
100074Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-036S595-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-036S595-50?
2-036S595-50 is a O-RING.
What parts can replace 2-036S595-50?
There are 18 known substitutes for 2-036S595-50: AMS 3302, E0540 2-036, AS568-036 2AA815A13F17EA14 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-036S595-50?
2-036S595-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-241-1073. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-036S595-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026