PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-027 N602-70
2-027 N602-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN, center_hole_diameter: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-265-1088, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-027 N602-70
NSN: 5331-00-265-1088
FSC: 5331 — O-RING
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
center_hole_diameter1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-265-1088
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-027 N602-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OUTSIDE DIAMETER: 1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER1.424 INCHES MINIMUM AND 1.458 INCHES MAXIMUM IN
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER1.295 INCHES MINIMUM AND 1.307 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
MS29513-27Interchangeable
interchangeable cross-reference
interchangeable
MS29513-027Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5315AInterchangeable
interchangeable cross-reference
interchangeable
C212-558027Interchangeable
interchangeable cross-reference
interchangeable
212-558-027Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-25988/1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-027 N602-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-027 N602-70?
2-027 N602-70 is a O-RING.
What parts can replace 2-027 N602-70?
There are 13 known substitutes for 2-027 N602-70: MS29513-27, MS29513-027, AMS-P-5315A and 10 more. Substitute compatibility should be verified for your specific system.
Is 2-027 N602-70 still available?
2-027 N602-70 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-027 N602-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026