PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-024-47-741
2-024-47-741 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, outside_diameter: 1.254 INCHES NOMINAL IN, center_hole_diameter: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-997-2989, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-024-47-741
NSN: 5331-00-997-2989
FSC: 5331 — O-RING
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
outside_diameter1.254 INCHES NOMINAL IN
center_hole_diameter1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-997-2989
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-024-47-741 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.254 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.254 INCHES NOMINAL IN
CENTER HOLE DIAMETER1.104 INCHES MINIMUM AND 1.124 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 24
2-024C0MPL449-6Interchangeable
interchangeable cross-reference
interchangeable
AS568-024Interchangeable
interchangeable cross-reference
interchangeable
ASTM D2000 M2FK608A19E36F19ZInterchangeable
interchangeable cross-reference
interchangeable
AS568-024 2AA815A13F17EA14Interchangeable
interchangeable cross-reference
interchangeable
2-024E515-8Interchangeable
interchangeable cross-reference
interchangeable
GV-39-619-12HTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-024-47-741?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-024-47-741?
2-024-47-741 is a O-RING.
What parts can replace 2-024-47-741?
There are 24 known substitutes for 2-024-47-741: 2-024C0MPL449-6, AS568-024, ASTM D2000 M2FK608A19E36F19Z and 21 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-024-47-741?
2-024-47-741 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-997-2989. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-024-47-741

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026