2-019SILICONE 70D — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-019SILICONE 70D: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN, center_hole_diameter: 0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-995-5381, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-019SILICONE 70D

NSN: 5331-00-995-5381
FSC: 5331 — O-ring
CAGE: 07060 — C. E. CONOVER & CO., INC. (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
center_hole_diameter	0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
elongation_percentage	125 MAXIMUM
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-995-5381

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

ELONGATION PERCENTAGE: 125 MAXIMUM

•

CENTER HOLE DIAMETER: 0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE	125 MAXIMUM
CENTER HOLE DIAMETER	0.795 INCHES MINIMUM AND 0.807 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 7

SAE-AS3582Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

MS9068-019Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

NS-019-S66Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

10198719Reference document

Same NSN cross-reference

Reference document — Informative reference only

2-019S1224-70Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

AS3582-019Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

No demilitarization required

Ready to buy 2-019SILICONE 70D?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-019SILICONE 70D?

2-019SILICONE 70D is a O-RING.

What parts can replace 2-019SILICONE 70D?

There are 7 known substitutes for 2-019SILICONE 70D: SAE-AS3582, MS9068-019, NS-019-S66 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-019SILICONE 70D?

2-019SILICONE 70D is cataloged in the U.S. Government catalog under NSN 5331-00-995-5381. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-019SILICONE 70D — O-RING

Request a Quote — 2-019SILICONE 70D