2-019E0540-80 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-019E0540-80: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE CLASS EPM, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN, center_hole_diameter: 0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-419-2973, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-019E0540-80

NSN: 5331-00-419-2973
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE CLASS EPM
temp_rating	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating	80.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
center_hole_diameter	0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-00-419-2973

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN

•

HARDNESS RATING: 80.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM

TECHNICAL CHARACTERISTICS

TEMP RATING	-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.926 INCHES MINIMUM AND 0.956 INCHES MAXIMUM IN
HARDNESS RATING	80.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.792 INCHES MINIMUM AND 0.810 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE CLASS EPM

SUBSTITUTES & CROSS-REFERENCES 7

AS568B-019Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

73326-10AReference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2 19E540 8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

7326-10Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

A6689-019-222Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

2-019E540-80Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy 2-019E0540-80?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-019E0540-80?

2-019E0540-80 is a O-RING.

What parts can replace 2-019E0540-80?

There are 7 known substitutes for 2-019E0540-80: AS568B-019, 73326-10A, 2 19E540 8 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-019E0540-80?

2-019E0540-80 is cataloged in the U.S. Government catalog under NSN 5331-00-419-2973. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-019E0540-80 — O-RING

Request a Quote — 2-019E0540-80