PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-018V747-75
2-018V747-75 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN, center_hole_diameter: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-054-2230, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-018V747-75
NSN: 5331-00-054-2230
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
center_hole_diameter0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-054-2230
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-018V747-75 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
MATERIAL DOCUMENT AND CLASSIFICATION: SP-955, TYPE I, CLASS 1; FLURO ELASTOMER MFR REF SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.070 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER SYNTHETIC
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING, PREFORMED
MATERIAL DOCUMENT AND CLASSIFICATIONSP-955, TYPE I, CLASS 1; FLURO ELASTOMER MFR REF SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.070 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
M83248/1-018Interchangeable
interchangeable cross-reference
interchangeable
ASC1442296Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-018Interchangeable
interchangeable cross-reference
interchangeable
1354049Interchangeable
interchangeable cross-reference
interchangeable
9603856Interchangeable
interchangeable cross-reference
interchangeable
91624528Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-018V747-75?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-018V747-75?
2-018V747-75 is a O-RING.
What parts can replace 2-018V747-75?
There are 7 known substitutes for 2-018V747-75: M83248/1-018, ASC1442296, M83248-1-018 and 4 more. Substitute compatibility should be verified for your specific system.
Is 2-018V747-75 still available?
2-018V747-75 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-018V747-75

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026