PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-015PS1-30-5
2-015PS1-30-5 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, center_hole_diameter: 0.544 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-419-0354, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-015PS1-30-5
NSN: 5331-00-419-0354
FSC: 5331 — O-RING
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
center_hole_diameter0.544 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-419-0354
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-015PS1-30-5 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER SYNTHETIC
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.588 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER SYNTHETIC
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
MILP5516Interchangeable
interchangeable cross-reference
interchangeable
5330000546935Interchangeable
interchangeable cross-reference
interchangeable
AMS-P-5516Interchangeable
interchangeable cross-reference
interchangeable
200034Interchangeable
interchangeable cross-reference
interchangeable
425276-4Interchangeable
interchangeable cross-reference
interchangeable
B108A39Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-015PS1-30-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-015PS1-30-5?
2-015PS1-30-5 is a O-RING.
What parts can replace 2-015PS1-30-5?
There are 23 known substitutes for 2-015PS1-30-5: MILP5516, 5330000546935, AMS-P-5516 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-015PS1-30-5?
2-015PS1-30-5 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-419-0354. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-015PS1-30-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026