PartsTable
Technical Data Sheet
Download PDF

2-015P642-70 — PACKING,PREFORMED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

2-015P642-70: PACKING,PREFORMED.

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER POLYURETHANE OVERALL, temp_rating: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL OVERALL, special_features: CROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200, peripheral_diameter: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN, center_hole_diameter: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-103-2968, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-015P642-70
NSN: 5330-00-103-2968
FSC: 5330 — Packing and Gasket Materials
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)
SPECIFICATIONS
materialRUBBER POLYURETHANE OVERALL
temp_rating-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
hardness_rating70.0 SHORE DUROMETER A NOMINAL OVERALL
special_featuresCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
peripheral_diameter0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
center_hole_diameter0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5330-00-103-2968
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-015P642-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL OVERALL
•
PERIPHERAL DIAMETER: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
•
MATERIAL: RUBBER POLYURETHANE OVERALL
TECHNICAL CHARACTERISTICS
TEMP RATING-40.0 FAHRENHEIT AND 180.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL OVERALL
PERIPHERAL DIAMETER0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
MATERIALRUBBER POLYURETHANE OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
78-077Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
GRP78-077Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 2-015P642-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-015P642-70?
2-015P642-70 is a PACKING,PREFORMED.
What parts can replace 2-015P642-70?
There are 2 known substitutes for 2-015P642-70: 78-077, GRP78-077. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-015P642-70?
2-015P642-70 is cataloged in the U.S. Government catalog under NSN 5330-00-103-2968. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-015P642-70

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.