2-015N756-75 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-015N756-75: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN, center_hole_diameter: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-046-0628, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-015N756-75

NSN: 5331-01-046-0628
FSC: 5331 — O-ring
CAGE: 83259 — PARKER-HANNIFIN CORPORATION DBA PNEUTRONICS DIV COMPOSITE SEALING SYSTEMS DIVISION (USA)

SPECIFICATIONS

material	RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM
hardness_rating	75.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
center_hole_diameter	0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-01-046-0628

COMPONENT DIAGRAM

KEY FEATURES

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN

•

HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN

•

MATERIAL: RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM

TECHNICAL CHARACTERISTICS

CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.678 INCHES MINIMUM AND 0.704 INCHES MAXIMUM IN
HARDNESS RATING	75.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.544 INCHES MINIMUM AND 0.558 INCHES MAXIMUM IN
MATERIAL	RUBBER ETHYLENE-PROPYLENE-DIENE CLASS EPDM

SUBSTITUTES & CROSS-REFERENCES 8

SAE-AS83461/1Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

901-03-862Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

AMS-P-83461/1Reference document

Same NSN cross-reference

Reference document — Secondary reference

MIL-M-83461/1-015Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

V1D10862Reference document

Same NSN cross-reference

Reference document — Replaced / superseded reference

080-58532-8Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusCancelled· U.S. Government catalog

Shelf-life managedNo demilitarization required

Ready to buy 2-015N756-75?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-015N756-75?

2-015N756-75 is a O-RING.

What parts can replace 2-015N756-75?

There are 8 known substitutes for 2-015N756-75: SAE-AS83461/1, 901-03-862, AMS-P-83461/1 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-015N756-75?

2-015N756-75 is cataloged in the U.S. Government catalog under NSN 5331-01-046-0628. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-015N756-75 — O-RING

Request a Quote — 2-015N756-75