2-014S383-70 — O-RING

✓ Government record, cited

— · ORING SEAL

PRODUCT OVERVIEW

2-014S383-70: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q, temp_rating: -175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, center_hole_diameter: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-024-3351, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

2-014S383-70

NSN: 5331-01-024-3351
FSC: 5331 — O-ring
CAGE: 02697 — PARKER-HANNIFIN CORP DIV O-RING DIVISION (USA)

SPECIFICATIONS

material	RUBBER SILICONE CLASS Q
temp_rating	-175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating	70.0 SHORE DUROMETER A NOMINAL
outside_diameter	0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
center_hole_diameter	0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
cross-sectional_height	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN	5331-01-024-3351

COMPONENT DIAGRAM

KEY FEATURES

•

TEMP RATING: -175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF

•

CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN

•

OUTSIDE DIAMETER: 0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN

•

HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL

•

CENTER HOLE DIAMETER: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN

•

MATERIAL: RUBBER SILICONE CLASS Q

TECHNICAL CHARACTERISTICS

TEMP RATING	-175.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT	0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER	0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
HARDNESS RATING	70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER	0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
MATERIAL	RUBBER SILICONE CLASS Q

SUBSTITUTES & CROSS-REFERENCES 4

2100-28Reference document

Same NSN cross-reference

Reference document — Secondary reference

10163363Reference document

Same NSN cross-reference

Reference document — Informative reference only

AS568-014S383-70Reference document

Same NSN cross-reference

Reference document — Secondary reference

ARP568-014S383-Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy 2-014S383-70?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 2-014S383-70?

2-014S383-70 is a O-RING.

What parts can replace 2-014S383-70?

There are 4 known substitutes for 2-014S383-70: 2100-28, 10163363, AS568-014S383-70 and 1 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 2-014S383-70?

2-014S383-70 is cataloged in the U.S. Government catalog under NSN 5331-01-024-3351. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

2-014S383-70 — O-RING

Request a Quote — 2-014S383-70