PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-014N507-90
2-014N507-90 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, temp_rating: -65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, center_hole_diameter: 0.500 INCHES NOMINAL IN, elongation_percentage: 115 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-612-6148, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-014N507-90
NSN: 5331-00-612-6148
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER OVERALL
temp_rating-65.0 FAHRENHEIT AND 160.0 FAHRENHEIT DEGF
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
center_hole_diameter0.500 INCHES NOMINAL IN
elongation_percentage115 MAXIMUM
cross-sectional_height0.062 INCHES NOMINAL IN
end_item_identificationREEL HANDLER,RF4 FILTER SYS
cross-sectional_shape_styleO-RING
cross_section_outside_diameter0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
NSN5331-00-612-6148
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-014N507-90 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
•
HARDNESS RATING: 90.0 SHORE DUROMETER A NOMINAL
•
OUTSIDE DIAMETER: 0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
•
TEMP RATING: -30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.484 INCHES MINIMUM AND 0.494 INCHES MAXIMUM IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL
OUTSIDE DIAMETER0.618 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
ELONGATION PERCENTAGE160 MAXIMUM
TEMP RATING-30.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
2-014N103-70Interchangeable
interchangeable cross-reference
interchangeable
8200-14Interchangeable
interchangeable cross-reference
interchangeable
GD00990188Interchangeable
interchangeable cross-reference
interchangeable
585514-1Interchangeable
interchangeable cross-reference
interchangeable
AS568-014Interchangeable
interchangeable cross-reference
interchangeable
2-014C147-70Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-014N507-90?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-014N507-90?
2-014N507-90 is a PACKING,PREFORMED.
What parts can replace 2-014N507-90?
There are 25 known substitutes for 2-014N507-90: 2-014N103-70, 8200-14, GD00990188 and 22 more. Substitute compatibility should be verified for your specific system.
Is 2-014N507-90 still available?
2-014N507-90 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-014N507-90

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026