PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-013-V884-74
2-013-V884-74 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN, center_hole_diameter: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-166-0988, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-013-V884-74
NSN: 5331-00-166-0988
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
center_hole_diameter0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
material_document_and_classificationAMS 7276 ASSN STD SINGLE MATERIAL RESPONSE
part_name_assigned_by_controlling_agencyPACKING,PREFORMED
NSN5331-00-166-0988
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-013-V884-74 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 7276 ASSN STD SINGLE MATERIAL RESPONSE
•
OUTSIDE DIAMETER: 0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
TECHNICAL CHARACTERISTICS (FLIS)
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
PART NAME ASSIGNED BY CONTROLLING AGENCYPACKING,PREFORMED
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 7276 ASSN STD SINGLE MATERIAL RESPONSE
OUTSIDE DIAMETER0.555 INCHES MINIMUM AND 0.577 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
10159810Interchangeable
interchangeable cross-reference
interchangeable
J221P013Interchangeable
interchangeable cross-reference
interchangeable
MIL-I-14652Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-14652BInterchangeable
interchangeable cross-reference
interchangeable
A-1-3Interchangeable
interchangeable cross-reference
interchangeable
L1206Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-013-V884-74?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-013-V884-74?
2-013-V884-74 is a O-RING.
What parts can replace 2-013-V884-74?
There are 29 known substitutes for 2-013-V884-74: 10159810, J221P013, MIL-I-14652 and 26 more. Substitute compatibility should be verified for your specific system.
Is 2-013-V884-74 still available?
2-013-V884-74 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-013-V884-74

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026