PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-013 E515-80
2-013 E515-80 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, temp_rating: -70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 80.0 SHORE DUROMETER A NOMINAL, cross-sectional_height: 0.070 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-006-5478, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-013 E515-80
NSN: 5331-01-006-5478
FSC: 5331 — O-RING
CAGE: C0308 — PARKER HANNIFIN GMBH O-RING DIVISION (DEU)
SPECIFICATIONS
materialRUBBER SYNTHETIC
temp_rating-70.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating80.0 SHORE DUROMETER A NOMINAL
cross-sectional_height0.070 INCHES NOMINAL IN
NSN5331-01-006-5478
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-013 E515-80 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
MATERIAL: RUBBER ETHYLENE-PROPYLENE CLASS EPM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.421 INCHES MINIMUM AND 0.431 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
MATERIALRUBBER ETHYLENE-PROPYLENE CLASS EPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
10164282Interchangeable
interchangeable cross-reference
interchangeable
2-013E515-8Interchangeable
interchangeable cross-reference
interchangeable
E20018J001-13Interchangeable
interchangeable cross-reference
interchangeable
RS26110-01329Interchangeable
interchangeable cross-reference
interchangeable
9177346-10Interchangeable
interchangeable cross-reference
interchangeable
013-3128Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-013 E515-80?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-013 E515-80?
2-013 E515-80 is a O-RING.
What parts can replace 2-013 E515-80?
There are 17 known substitutes for 2-013 E515-80: 10164282, 2-013E515-8, E20018J001-13 and 14 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-013 E515-80?
2-013 E515-80 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-006-5478. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-013 E515-80

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026