PartsTable
Technical Data Sheet
PartsTable / O-RING / 2-011-N674-70
2-011-N674-70 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, temp_rating: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF, hardness_rating: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM, outside_diameter: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN, center_hole_diameter: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN, elongation_percentage: 331 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-580-6586, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2-011-N674-70
NSN: 5331-00-580-6586
FSC: 5331 — O-RING
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
temp_rating-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
hardness_rating65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
outside_diameter0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
center_hole_diameter0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
elongation_percentage331 MAXIMUM
cross-sectional_height0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
material_document_and_classificationASTM D2000 3CH715A25B15E16E36F ASSN STD SINGLE MATERIAL RESPONSE
NSN5331-00-580-6586
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2-011-N674-70 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
TEMP RATING: -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
•
HARDNESS RATING: 65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
•
ELONGATION PERCENTAGE: 331 MAXIMUM
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
OUTSIDE DIAMETER: 0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM D2000 3CH715A25B15E16E36F ASSN STD SINGLE MATERIAL RESPONSE
•
CENTER HOLE DIAMETER: 0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
TEMP RATING-40.0 FAHRENHEIT AND 250.0 FAHRENHEIT DEGF
HARDNESS RATING65.0 SHORE DUROMETER A MINIMUM AND 75.0 SHORE DUROMETER A MAXIMUM
ELONGATION PERCENTAGE331 MAXIMUM
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OUTSIDE DIAMETER0.430 INCHES MINIMUM AND 0.452 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM D2000 3CH715A25B15E16E36F ASSN STD SINGLE MATERIAL RESPONSE
CENTER HOLE DIAMETER0.296 INCHES MINIMUM AND 0.306 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 37
29382Interchangeable
interchangeable cross-reference
interchangeable
26139Interchangeable
interchangeable cross-reference
interchangeable
01006Interchangeable
interchangeable cross-reference
interchangeable
1Interchangeable
R970
interchangeable
1WITHPEDESTALInterchangeable
interchangeable cross-reference
interchangeable
20105Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2-011-N674-70?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-011-N674-70?
2-011-N674-70 is a O-RING.
What parts can replace 2-011-N674-70?
There are 37 known substitutes for 2-011-N674-70: 29382, 26139, 01006 and 34 more. Substitute compatibility should be verified for your specific system.
Is 2-011-N674-70 still available?
2-011-N674-70 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-011-N674-70

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026