PartsTable
Technical Data Sheet
Download PDF

2-010-124 — CAP,SAFETY,DEHYDRATOR

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

2-010-124: CAP,SAFETY,DEHYDRATOR.

The CAP,SAFETY,DEHYDRATOR is a the manufacturer industrial component. Key specifications include end_item_identification: CP-2504/URC, COMPUTER,CONTROL-MONITOR, part_name_assigned_by_controlling_agency: TAPE DRIVE SCSI. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-101-8057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 2-010-124
NSN: 5306-01-101-8057
NIINs: 011018057, 011426136, 014977517
FSC: 5306 — Bolts
CAGE: 11530 — LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN INFORMATION SYSTEMS & GLOBAL SOLUTIONS (USA)
SPECIFICATIONS
end_item_identificationCP-2504/URC, COMPUTER,CONTROL-MONITOR
part_name_assigned_by_controlling_agencyTAPE DRIVE SCSI
NSN5306-01-101-8057
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 2-010-124 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.460 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.750 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
FEATURES PROVIDED: FINISHED HEAD
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
FASTENER LENGTH1.460 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
THREAD LENGTH0.750 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
FEATURES PROVIDEDFINISHED HEAD
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT
SUBSTITUTES & CROSS-REFERENCES 1
9710-81Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 2-010-124?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2-010-124?
2-010-124 is a CAP,SAFETY,DEHYDRATOR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 2-010-124?
There is 1 known substitute for 2-010-124: 9710-81. Substitute compatibility should be verified for your specific system.
What is the NSN for 2-010-124?
2-010-124 is cataloged in the U.S. Government catalog under NSN 5306-01-101-8057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2-010-124

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.